Waste gas incineration and waste heat recovery projects organic waste gas treatment system for high-temperature incineration thermal incineration of high concentration of organic waste, by adjusting the quantity of combustion and combustion air is supplied to ensure complete combustion of exhaust gases and maintain the furnace combustion temperature, press Flue Gas The residence time in the furnace chamber volume is determined to ensure that the exhaust gas in the furnace to achieve complete combustion of organic matter decomposition. Its main advantages are: 1, combustion furnace according to 3T (temperature, time and turbulence) guidelines designed to ensure that the exhaust gas combustion chamber in the furnace body full oxidation, pyrolysis, combustion, organics removal rate of 99.99% damage. 2, the reasonableness of the residence time is to ensure complete combustion of exhaust gases premise, QNGW-Q-type exhaust gas treatment furnace fully consider high-temperature combustion in the furnace residence time, the normal operating mode of the combustion chamber temperature above 900 ℃, gas residence time of ≥ 2s, to ensure complete decomposition of organic matter. And furnace design heat storage wall. 3, the use of the exhaust gas vortex nozzle, when the exhaust gas into the furnace to enter the state of rotation, a sufficient disturbance; gas, fuel gas and combustion air in the incinerator shear mixing, degree of mixing good, high turbulence, combustion high speed and efficiency, excess air ratio is low, it can save a lot of fuel. 4, exhaust gas treatment safe - do not rule out the former has started firing explosive gases can not function to prevent gas explosion in the furnace with a flame detector devices, once the furnace flame or ignition failure occurs, immediately cut off gas supply, alarm system sound, safe and reliable. 5, using a number of advanced technology, simplified equipment, easy maintenance, and reduce operating costs. 6, the main incinerator is a horizontal cylinder straight-type furnace lined with high temperature refractory bricks, the middle is insulation material, the outer layer of steel plate to protect. 7, the incinerator at the outlet has a thermocouple, a timely reaction furnace temperature and automatically adjust the amount of combustion of the fuel by the temperature measurement and feedback. 8, with improved waste heat utilization facilities, can be recycled steam, hot air, hot water for production and life use.